iPhone

An iPhone Lover's Take On The Nexus S
There's a scene in Iron Man 2 in which Justin Hammer (Sam Rockwell) shows off the mechanical soliders he has been working on %26mdash; his would-be.

Blog Content

Week 22

OK, so being a construction worker in a blizzard wouldn't be that rewarding. I starting taking these pictures in the rain, which promptly turned to hail and then a full on blizzard.




The reinforcing steel for the south in-fill wall can be seen here. There is a lot less steel than in the corners.

Here, the crane is setting the rebar for the Northeast corner.

This guy at the top of the wall doing the pour sure earned his pay as the blizzard started!

These photos were taken before the blizzard started.

iPhone

Skype video calling for iPhone is official, available now (update .
All signs have been pointing to this release for a few days now, but we'll admit: we expected Skype to wait until CES next week.

Blog Content

iPhone

Verizon iPhone to Come After CES? - Mac Rumors
Businessweek reports that Apple is planning on introducing the Verizon iPhone sometime after CES 2011, according to a person familiar with Apple's plans. Businessweek speculates the anticipated eve.

Blog Content

How to access sharing data offline

Access the shared data offline allows you to keep using your shared files, folders and software programs when disconnected from the data server. When you reconnect to your data server, all files will be synchronized to the files on the network.

There are two types of configurations required to set the access shared folders offline available, one for data server and other for client computer.

Configuration on Data Server.

First locate the folders that you would like to share or make new folders then share these folders so they can be accessible to any one on the network.

Now right click on that folder and click on the option "Sharing and security".

A small dialog box will appear with the title "data properties". Under the "Sharing" tab, select the check box "Share this folder on the network" under the "Network sharing and security".

Now set the share level permissions that you want to give the users on every folder. Enable cache of share folders by click on cache button (by default it will be enabled).

Configuration on Client Computer

On the client computer, first open My Computer then click on Tools.

In Tools menu bar, click on Folder Options, a window will appear with the title Folder Options.

Under the Offline File tab, check the option Enable Offline File. Here you can choose the synchronization process "Synchronize all offline files when logging on", "Synchronize all offline files before logging off" and others.

Click on Apply button to save the settings and then Ok button to close this window.

Now sitting on the client computer, try to access the shared folder from the data server.

First Right click on the shared folder and Click on Make available offline.

To synchronizing the offline work from client computer to data server, again open My Computer then click on Tools. Click on Synchronize then click on synchronizing button.

After that down to data server and then try to access share folders by give the UNC (Universal Naming Convention) path of data server. But it will be accessible weather the server is down or up...

EnjOy :) MamoOn..

How to start windOws Xp faster

One of the best ways to help you start windows faster quickly is to reduce the number of programs scuh as msn,yahoo etc that are loaded while Windows is “waking up.”To tweak the startup, you must use a utility called msconfig, as follows:




Start windows faster - Method:



Step 1:
Click the Start button in the lower-left corner of Windows.


Step 2:
Click Run.


Step 3:
A window opens.Type msconfig in the blank, and then click the OK
button or press the Enter key.

Step 4:
The System Configuration Utility window opens. Click the Startup
tab on the far right
.
Step 5:
In the Startup Item column on the left is a list of programs with
checkmarks next to them.A checkmark indicates
that the program is scheduled to launch each time Windows starts.To
prevent a program from loading at startup, remove the checkmark
from its box. Here are guidelines about which programs to allow or to
disable:
• Disable non-essential multimedia programs like qttask (which is
part of the QuickTime software), realsched (which is part of the
RealPlayer software), or Adobe Reader.
• Allow common processes for Windows and Microsoft Office.
• Allow programs related to your antivirus software, antispyware
software, or firewall. For example, if you use the ZoneAlarm fire-
wall and Spy Sweeper antispyware program, then you should
allow the startup programs named zlclient and SpySweeper.
• Allow programs related to your printer. For example, if you have
an Epson printer, then allow the startup program named Epson
Status Monitor.


Step 6:
If you are uncertain about whether or not to disable a particular program, do the following:
a. Write the program’s name on a piece of paper.
b. Connect to the Internet.
c. In your Web browser, type http://www.processlibrary.com to
visit the Process Library.
d. Near the top of this website’s main page is a Search for a Process
search box.Type the name of your program into this box, and
then click the Search Now button.
You are taken to a Web page that explains what your program is
used for and whether or not it is essential to your computer’s
performance.


Step 7:
7. When you have finished tweaking the System Configuration Utility,
click the Apply button.


Step 8:
8.Click the OK button.


Step 9:
9. A message alerts you that you must restart your computer for the
changes to take effect. Click the Restart button.Your computer auto-
matically shuts down and reboots.


Step 10:
When you return to Windows, a message alerts you that you have just
used the System Configuration Utility to change the way Windows
starts. Put a checkmark in the box labeled “Don’t show this message
or launch the system configuration utility when Windows starts.”


Step 11:
Click the OK button.
By following these steps you wil realize that your windows no starts faster.. EnjOy :) MamoOn..

Download any video from youtube for free widout ant sofrware

Here is the easiest way to download any video from Youtube.

While playing the video on youtube.com, Copy its location from the address bar like www.youtube.com/watch?v=sasad7657dms2

then add the word ‘kick’ between www. and youtube.com/link…….

EXAMPLE: www.kickyoutube.com/watch?v=sasad7657dms2

That’s it, Download without any other software or going to any other site, as their are many but this method is the best one according to me. Enjoy :) MamoOn..

iPhone

iPhone and iPad among eBay's "top-shopped" items in 2010
iPhone 4 eBay listed its "Top Shopped" items of 2010 this week and the iPhone 4 rose to the top, beating out classic toys like Barbie and Hot Wheels. While the iPhone 4 took first place, the iPad was not far behind, occupying fifth spot ...

Blog Content

Fighting Hunger in Utah (Update)

Government doesn't necessarily need to be involved in a social safety network; indeed federally it is a violation of Constitutional principles. Jesus commanded his disciples or followers to "feed [his] sheep"; what Jesus didn't do was command the Roman government to feed the sheep. As families and as citizens in our communities we are empowered and even admonished to take responsibility for our own.

An example of a corporate program which we all can support as a community during this Christmas season is Walmart's Fighting Hunger program. Walmart has identified two communities in our state (Ogden and Salt Lake) as needing help among many nationally and has committed to donating $1M to fighting hunger in the community garnishing the most Facebook votes by Dec 31st and $100K to each of the next five communities.

The contest has been fun to track and participate in. Both Utah communities were far down in the rankings and have gradually moved up. Ogden/Clearfield is now in 6th place which just barely qualifies for the $100K if no other community posts a late surge to overtake (quite possible, to be sure) while Salt Lake City is in the #2 position. A large last-minute push these next couple of days could be what SLC needs to get the $1M.

Part of the themostsearched mission is a call to action. With less time than it took to read this entry, you could help fight hunger in Utah. I encourage you to so do.

+++ Update 12/30 6pm:

With less than 24 hours left to go, Salt Lake has taken first place by a narrow margin for the first time over Fresno in the contest while Ogden has settled in for a solid 4th. The amount of interest in the contest has surged with tallies of both first and second place exceeding the entire populations of their respective counties. Wow.

iPhone

Just got an iPhone? The best apps, accessories, and tips - Engadget
Someone must really like you -- otherwise, how did you end up with an iPhone this holiday season? Yeah, we know, iPads don't really fit.

Blog Content

Begniner's Guide To Hack Wirles Network

Hacking WEP wifi passwords
Basic Entry into a WEP Encrypted Network

This Tutorial explains EVERYTHING in detail So, it is quite long. Enjoy.

1. Getting the right tools
This Tutorial is in Bt3 But Download The Latest Release Bt4.

Download Backtrack 4. It can be found here:

http://www.backtrack-linux.org/downloads/

I downloaded the Dvd iso and burned it to a Dvd. Insert your BT4 Dvd/usb drive and reboot your computer into BT4. I always load into the 3rd boot option from the boot menu. (VESA/KDE) You only have a few seconds before it auto-boots into the 1st option so be ready. The 1st option boots too slowly or not at all so always boot from the 2nd or 3rd. Experiment to see what works best for you.

2. Preparing the slave network for attack

Once in BT4, click the tiny black box in the lower left corner to load up a "Konsole" window. Now we must prep your wireless card.
Type:

airmon-ng

You will see the name of your wireless card. (mine is named "ath0") From here on out, replace "ath0" with the name of your card.
Now type:

airmon-ng stop ath0

then type:

ifconfig wifi0 down

then:

macchanger --mac 00:11:22:33:44:55 wifi0

then:

airmon-ng start wifi0

What these steps did was to spoof (fake) your mac address so that JUST IN CASE your computeris discovered by someone as you are breaking in, they will not see your REAL mac address. Moving on...
Now it's time to discover some networks to break into.

Type:

airodump-ng ath0

Now you will see a list of wireless networks start to populate. Some will have a better signal than others and it is a good idea to pick one that has a decent signal otherwise it will take forever to crack or you may not be able to crack it at all.
Once you see the network that you want to crack, do this:

hold down ctrl and type c

This will stop airodump from populating networks and will freeze the screen so that you can see the info that you need.

**Now from here on out, when I tell you to type a command, you need to replace whatever is in parenthesis with what I tell you to from your screen. For example: if i say to type:
-c (channel)
then dont actually type in
-c (channel)
Instead, replace that with whatever the channel number is...so, for example you would type:
-c 6
Can't be much clearer than that...lets continue...

Now find the network that you want to crack and MAKE SURE that it says the encryption for that network is WEP. If it says WPA or any variation of WPA then move on...you can still crack WPA with backtrack and some other tools but it is a whole other ball game and you need to master WEP first.



Once you've decided on a network, take note of its channel number and bssid. The bssid will look something like this --> 05:gk:30:fo:s9:2n
The Channel number will be under a heading that says "CH".
Now, in the same Konsole window, type:

airodump-ng -c (channel) -w (file name) --bssid (bssid) ath0

the FILE NAME can be whatever you want. This is simply the place that airodump is going to store the packets of info that you receive to later crack. You don't even put in an extension...just pick a random word that you will remember. I usually make mine "wepkey" because I can always remember it.

**Side Note: if you crack more than one network in the same session, you must have different file names for each one or it won't work. I usually just name them wepkey1, wepkey2, etc.

Once you typed in that last command, the screen of airodump will change and start to show your computer gathering packets. You will also see a heading marked "IV" with a number underneath it. This stands for "Initialization Vector" but in noob terms all this means is "packets of info that contain clues to the password." Once you gain a minimum of 5,000 of these IV's, you can try to crack the password. I've cracked some right at 5,000 and others have taken over 60,000. It just depends on how long and difficult they made the password.

Now you are thinking, "I'm screwed because my IV's are going up really slowly." Well, don't worry, now we are going to trick the router into giving us HUNDREDS of IV's per second.

3. Actually cracking the WEP password

Now leave this Konsole window up and running and open up a 2nd Konsole window. In this one type:

aireplay-ng -1 0 -a (bssid) -h 00:11:22:33:44:55 ath0

http://i574.photobucket.com/albums/ss184...eplay1.jpg

This will send some commands to the router that basically cause it to associate with your computer even though you are not officially connected with the password. If this command is successful, you should see about 4 lines of text print out with the last one saying something similar to "Association Successful :-)" If this happens, then good! You are almost there. Now type:

aireplay-ng -3 -b (bssid) -h 00:11:22:33:44:55 ath0

http://i574.photobucket.com/albums/ss184...eplay2.jpg

This will generate a bunch of text and then you will see a line where your computer is gathering a bunch of packets and waiting on ARP and ACK. Don't worry about what these mean...just know that these are your meal tickets. Now you just sit and wait. Once your computer finally gathers an ARP request, it will send it back to the router and begin to generate hundreds of ARP and ACK per second. Sometimes this starts to happen within seconds...sometimes you have to wait up to a few minutes. Just be patient. When it finally does happen, switch back to your first Konsole window and you should see the number underneath the IV starting to rise rapidly. This is great! It means you are almost finished! When this number reaches AT LEAST 5,000 then you can start your password crack. It will probably take more than this but I always start my password cracking at 5,000 just in case they have a really weak password.

Now you need to open up a 3rd and final Konsole window. This will be where we actually crack the password. Type:

aircrack-ng -b (bssid) (filename)-01.cap

Remember the filename you made up earlier? Mine was "wepkey". Don't put a space in between it and -01.cap here. Type it as you see it. So for me, I would type wepkey-01.cap
Once you have done this you will see aircrack fire up and begin to crack the password. typically you have to wait for more like 10,000 to 20,000 IV's before it will crack. If this is the case, aircrack will test what you've got so far and then it will say something like "not enough IV's. Retry at 10,000." DON'T DO ANYTHING! It will stay running...it is just letting you know that it is on pause until more IV's are gathered. Once you pass the 10,000 mark it will automatically fire up again and try to crack it. If this fails it will say "not enough IV's. Retry at 15,000." and so on until it finally gets it.

http://i574.photobucket.com/albums/ss184...crack1.jpg

If you do everything correctly up to this point, before too long you will have the password! now if the password looks goofy, dont worry, it will still work. some passwords are saved in ASCII format, in which case, aircrack will show you exactly what characters they typed in for their password. Sometimes, though, the password is saved in HEX format in which case the computer will show you the HEX encryption of the password. It doesn't matter either way, because you can type in either one and it will connect you to the network.

Take note, though, that the password will always be displayed in aircrack with a colon after every 2 characters. So for instance if the password was "secret", it would be displayed as:
se:cr:et
This would obviously be the ASCII format. If it was a HEX encrypted password that was something like "0FKW9427VF" then it would still display as:
0F:KW:94:27:VF
Just omit the colons from the password, boot back into whatever operating system you use, try to connect to the network and type in the password without the colons and presto! You are in!

It may seem like a lot to deal with if you have never done it, but after a few successful attempts, you will get very quick with it. If I am near a WEP encrypted router with a good signal, I can often crack the password in just a couple of minutes.

I am not responsible for what you do with this information. Any malicious/illegal activity that you do, falls completely on you because...technically...this is just for you to test the security of your own network. :-)

I will gladly answer any legitimate questions anyone has to the best of my ability.
HOWEVER, I WILL NOT ANSWER ANYONE THAT IS TOO LAZY TO READ THE WHOLE TUT AND JUST ASKS ME SOME QUESTION THAT I CLEARLY ANSWERED. No one wants to hold your hand through this...read the tut and go experiment until you get it right.

There are rare occasions where someone will use WEP encryption with SKA as well. (Shared Key Authentication) If this is the case, additional steps are needed to associate with the router and therefore, the steps I lined out here will not work. I've only seen this once or twice, though, so you probably won't run into it. If I get motivated, I may throw up a tut on how to crack this in the future.
Hacking WEP wifi passwords
By MamoOn,,

How To Recover deleted or corrupt photos

Hello Friends, Today I will provide a software named DiskInternals Flash Recovery 4.2 full download using which you can recover deleted or corrupted photos within few seconds. Isn't that nice, its best that you can recover all your deleted data from the flash memory cards used in cameras.

DiskInternals Flash Recovery is a flash memory file recovery tool that restores all corrupted and deleted photographs or the ones that were lost due to hardware malfunction. This utility works even if a memory card was re-formatted.

Features:
• Easy Recovery Wizard.
• Can preview and recover JPEG, JPG, TIFF, BMP, PNG, GIF, TGA and other images.
• Can preview and recover RAW images:
• CRW - Canon Digital Camera Raw Image Format.
• CR2 - Canon Digital Camera Raw Image Format version 2.0.
• NEF - Nikon Digital SLR Camera Raw Image File.
• PEF - Pentax Raw Image Format
• RAF - Fuji CCD-RAW Graphic File.
• X3F - Sigma Camera RAW Picture File.
• BAY - Kodak/Roper Bayer Picture Sequence.
• ORF - Descent 3 Outrage Room Format.
• MRW - Minolta Diamage Raw Image File.
• RAW - Image Alchemy HSI Temporary Raw Bitmap
• SRF - Sony DSC-F828 Raw Image File.
• Other RAW images
• Works under Microsoft® Windows® 95, 98, ME, NT, 2000, XP, 2003 Server.
• Supported file systems: FAT12, FAT16, FAT32, NTFS (NT 4), NTFS5 (2000, XP).
• Recovered files can be saved on any (including network) disks visible to the host operating system.
• Creates recovery snapshot files for logical drives. Such files can be processed like regular disks.

By Lokish

Download DiskInternals Flash Recovery 4.2 Here

Christmas at Temple Square

What would Christmas be in Utah without a trip to Temple Square to see the Christmas lights and the Nativities? Here are some photos that I took on a trip a couple of days ago with my family. I hope you enjoy them as much as I did.

What a beautiful Christmas tree in the lobby of the Joseph Smith Memorial Building!

This Nativity, in the middle of the reflecting pond, is directly east of the Salt Lake Temple. It is quite stunning at night.

What a beautiful Christmas tree located in the South Visitors' Center!

This incredible model of the Salt Lake Temple is also in the South Visitors' Center. It must be fairly new, since I have not seen it before. (I would love to see one like this of the Brigham City Temple!)

Model cutaway of the east side of the temple.

You can look up from the model and see the real thing through the giant windows! It is well worth the trip and is truly amazing.

Here is a little history of the statue of the Angel Moroni and its sculptor, Cyrus Dallin.

I am so grateful for diamond saws, drills and power tools, not to mention trucks and heavy equipment, electricity, gasoline, and diesel. Otherwise, the Brigham City Temple would have to be build like the Salt Lake Temple and it would take 40 years instead of 2 years. Now, the contractor can build the structure from concrete and steel and just use thin slabs of stone for the exterior.

The only drawback I see is that we, as individual members, do not get to participate directly in the construction of the temple. I think that would be a deeply rewarding experience to be able to say, "I helped build this or that on the temple."

This blog is my way of participating in the construction of the Brigham City Temple.

The model of Jerusalem as it was believed to have been at the time of Christ's mortal life. This is found in the North Visitors' Center on Temple Square in Salt Lake.